Impact Mill Machine Of Dried Seaweed Flakes

With the continuous development of pulverizer technology, Impact Mill Machine of Dried Seaweed Flakes has gradually penetrated into people's daily lives.

One Impact Mill Machine Of Dried Seaweed Flakes is very high. If you want to use Impact Mill Machine of Dried Seaweed Flakes for a long time, please pay attention to the following:

1. Production In the process, the temperature rise of the bearing should be checked frequently. When the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5. The host and level distribution bearing of the Impact Mill Machine of Dried Seawed Flakes are lubricated with special grease (265-295 degrees).
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature Will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.

The above is a 7 point introduction to the daily maintenance of Impact Mill Machine of Dried Seaweed Flakes for you.



ALPA potassium permanganate IMPACT MILL MACHINE OF Dried Seaweed Flakes Sharing: This customer is mainly engaged in the development of high energy chemical energy development. The study needs a device that can make ultraf fine pulverized in high potassium permanganate. Finally, I purchased an Impact Mill Machine of Dried Seaweed Flakes in our AlPa.
Technical parameters:
Finished granularity:
100-325 mesh
Production capacity: 5kg

Any machine device is in useBefore you have to pay attention, you must pay attention to the use, operation, make it damaged by minimize, then what should you pay attention to before using Impact Mill Machine Of Dried Seaweed Flakes?
1, before use, check if all fasteners are fastened and whether the direction of operation of the spindle is correct, so as not to damage the machine.
2, lubrication should be performed as required to ensure the normal operation of the machine.
3, before adding the material to the pulverizer, it is not mixed to avoid damage to the grinding machine.
4, whether foreign matter or impurities, if it should be disposed in time to avoid damage to the tool.

6, some parts should be checked regularly.If it is damaged, it should be replaced immediately.

Shandong AlPa is a 20-year experience manufacturing company with Impact Mill Machine of Dried Seawed Flakes equipment, with a number of patents, welcome to inquire!