Pin Crusher of High Purity Alumina

Pin Crusher of High Purity Alumina is a very convenient device that can be used to crush all kinds of products, especially some fine particle products.

One Pin Crusher of Highh Purity Alumina's cost is high, if you want to use Pin Crusher of High Purity Alumina for a long time, please pay attention to the following:

During the production process, the temperature rise of the bearing should be checked frequently, when heaven When more than 50 ° C, check should be stopped, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5.pin Crusher Of High Purity Alumina's host and level score bearing is lubricated with special grease (265-295 degrees).
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature Will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.

The above is a seventeen introduction to the daily maintenance of Pin Crusher of High Purity Alumina.


ALPA Composite Pin Crusher of High Purity Alumina Case Sharing: This customer is a renewable resource company, the customer needs to select a different particle size selection of composite powder, and it is necessary to select less than 30μm ultrafine powder. Investigate a number of domestic grading equipment manufacturers, did not find the right equipment, and finally found the right equipment in our AlPa, and selected our vertical grading machine equipment. Product particle size: D97 ≤ 30μm hour yield: 80T
Welcome major composite powder manufacturers to visit, incompetent experiments.

In order to achieve better use, you must also pay attention to the daily maintenance of PIN CRUSHER OF HIGH PURITY Alumina., Pay attention to the following:
1. In the production process, the airflow baffle should be checked regularly, and when the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.
2. When using the pulverizer, the drive belt is easily stretched, and should pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.

4. Continuously check the wear of blade and bushing, if the productivity is lowered, the particles are thicker, and will be replaced after wear.
5. The change period of the pulverizer bearing is 2000 hours, and the amount of the bearing cavity is 1 ≤ 2 (try) or 3 ≤ 4 (try), otherwise the bearing temperature is too high.

The equipment market is a lot of changing. At present, Pin Crusher of High Purity Alumina has certain needs, but the society is constantly evolving, no matter what industry needs to keep pace with the times.Can lead the industry.