News

Home > News

Hammer grinder of pole piece

2022-01-07 16:10:44

Hammer Grinder of Pole Piece can be used in the current stage of industrial production, and AlPA has been committed to the development and application of equipment such as classifiers for many years. The classification machine has gradually begun to develop in the direction of modernization, and we believe that we can provide a complete set of production planning programs to our customers in a large range.

A Hammer Grinder of Pole Piece costs, if you want to use Hammer Grinder of Pole Piece for a long time, please pay attention to the following:

1. During the production process, Temperature rises in the bearing frequently, when the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5.Hammer Grinder of Pole Piece Host and level distribution bearings are lubricated with special grease (265-295 degrees).
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature Will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.

The above is a seven point introduction to the daily maintenance of Hammer Grinder of Pole Piece.




ALPA seaweed feed Hammer Grinder of polex case sharing: The company is a seafood business company in Yantai. It has been found to be pulverized to seaweed during breeding. After crushing, it can be used as a sea cucumber feed. Application, saving the cost of feed purchase. By comparing a long-term use of a Hammer Grinder of Pole Piece, it is possible to save the cost of the production line for several years. The company purchased our ALPA Hammer Grinder of Pole Piece. Technical parameters:
Finished granularity: D90: 400 mesh
Production capacity: 400kg / h

In the production process, Hammer Grinder of Pole Piece is widely used, how do you operate more secure?

1. Use according to the rules when using the classifier, do not exceed the range of use because it will be very damaged.
2, if the superfine classifier is running, the operator does not stand in the range of rotation to avoid accidents.
3, the staff is in the work, in order to ensure their own safety, wear a well-dressed work apparel.
4, when the classifier is added, do not add hard, because the hard object will damage the machine.
5. If the classifier begins to work, the staff should not leave and prevent problems.

6. If the superfine grade machine is found, it is necessary to stop checking.

7. Do not open the cover or other actions before the classifier is not completely stopped, if you want to operate, you need to stop the machine completely.
Welcome everyone to inquire!