Cell Grinder of Sulfamic ACID

Cell Grinder of Sulfamic Acid mainly applied the pulverization mechanism determined its scope of application, high finished product, widely used in chemical, minerals, metallurgy, abrasives, ceramics, refractories, pharmaceuticals, pesticides, food, health care Products, new materials and other industries.

1. The grinding temperature is low, which can be pulverized, and low melting materials. According to the high-speed jet, the Tomson effect, when the gas is thermally expanded, the gas will cool itself, thus canceling the heat generated by collision and friction.
2, the production cycle is short, and the abundance rate is high. Due to high speed collisions and closed crushing, the probability of collision between materials is large, and dust is not leaked.
3, a product having high purity (less pollution), uniform particle size distribution (D95 cumulative frequency) can be obtained.
4. Some materials that require wet pulverization can also be pulverized by airflow pulverization to achieve uniform and small powder.
5, a variety of joint operations can be implemented while drying can be achieved. It can be seen that the research hotspot of the air pulverizer is very highlighted, and it plays a pivotal role in the pulverization process of the pharmaceutical industry.
ALPA White Carbon Cell Grinder of Sulfamic ACID Case Sharing: The company is a company engaged in white carbon black production. A ultra-fine pulverization apparatus for producing two granular white carbon products can be generated in the production process. After investigation, we finally purchased our AlPa's Cell Grinder of Sulfamic Acid.
Technical parameters:
Finished granularity: D50: 6.78 D90: 12.8μm
Production capacity: 30kg

Daily maintenance of Cell Grinder of Sulfamic Acid
1, production process In the middle, it is necessary to check the temperature rise of the bearing, when the temperature rise exceeds 50 ° C, should be stopped, and the reason is to rule out the fault.
2, when the new machine is running, the drive belt is easy to elongate, and should pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt.
3, if the loss case should be checked frequently, replace the quality and production volume in time.
4, the blade, the bushing should often check the wear situation. If the wear is worn, the productivity is lowered, and the particle size is replaced after the particle size is replaced.

6, the replacement period of the bearing is 2000 hours, and the amount of the grease is filling the amount of the space in the bearing cavity (episode) or 3/4 (lower test) cut, not too much to fill the grease, otherwiseThe bearing temperature is too high.
7. The spiral feeder has been changed during the change of the lipid of 4,000 hours, and the calcium-based grease is added.


For more consultation, please continue to pay attention to us, or inquire.