News

Home > News

Vibration Crusher for Charcoal Powder

2022-01-04 16:17:42

It is well known that the product technology of Vibration Crusher for Charcoal Power Powder has been widely valued by the industry.

High-speed jet enters the crushing chamber, collides with particles, multiple times in the friction of high pressure air, shear and pulverized, pulverized materials, and the assembly of rising airflow motion, under the action of the fan, At the power of the Vibration Crusher For Charcoal Power Powder, the thickness of the material is separated from the separation, the fine particle size of the pulverized wheel into the cyclone separator and dust removal, continues to be pulverized.

The pulverizer produced by AlPa can perform local internal changes depending on the different characteristics of the material, so that it is more suitable for the pulverization requirements of the material. The crusher has a greater amount of treatment, energy saving, simple operation, and low maintenance costs.

Alpa Pectin Vibration Crusher For Charcoal Powder Case Share: Yantai A pectin shares, the company needs to purchase a super-smashing equipment for pulverizing gelatin. Through multi-party investment and incoming experiment, the company purchased our AlPa's Vibration Crusher for Charcoal Powder as its pectin ultrafine pulverized equipment.

Technical parameters:
Finished granularity: 60-200 mesh
Production capacity: 300kg

Ultra Vibration Crusher for Charcoal Powder uses air separation, heavy polishing, shear The form of ultrafine pulverized equipment in the form of dry materials is widely used in various industries. Let's take a brief introduction to its daily maintenance content.

1, when the bearing oil is high, it is necessary to stop checking the cause of the fault and removal immediately.
2, easy to wear parts should pay attention to the degree of wear, pay attention to and do the preparation for replacement of parts.
3, for the top surface of the chassis of the active device, it is necessary to remove dust and other debris avoiding the machine that cannot be broken, the active bearing cannot move on the chassis, causing an accident.
4, all loads of the machine are bearings, so good lubrication and bearings have a large relationship, it can directly affect the service life of the machine and the operating rate, so the amount of lubricating oil required to be injected should be reached. Good seal.
5, the sleeper installed is easy to loosen, and it must be checked frequently.
6. Note that the operation of each part of the machine is normal.
7. If the rotating gear is running, if there is a hitting sound, it should be closed in time.And remove the fault.

Welcome everyone chooses our Shandong AlPa, the company specializes in the production and development and service of gas flow crusher product technology, and the company provides customers with safe and reliable Vibration Crusher For Charcoal Powder's products and services, solvingThe worries of our customers.