Rotor Mills for CEMENT

Modern production not only pursues production and finished product quality, but also develops toward environmental protection. Especially in the comminution industry, the overall development trend of Rotor Mills for CEMENT technology in China is the stable development of the Rotor Mills for CEMENT technology.

For the longer life of Rotor Mills for cement, it is necessary to keep good performance, need to keep in mind usage.
1, for the newly purchased equipment requires novice necessary to understand its operating specifications. If it is a novice operation, it is necessary to prevent unnecessary losses during the operation.
2, if the machine is abnormal, if the machine is abnormal, it is necessary to keep the mechanical personnel to repair debugging and turn off the power. Non-designated personnel prohibit private commissioning or disassembly machine components during the maintenance process. When repairing commissioning, you must turn off the machine power.
3, the Rotor Mills for CEMENT is cleaned in time after use. Keep the internal cleaning of the Rotor Mills for CEMENT to avoid oxidation of the material and the inner contact.


ALPA Gypsum Rotor Mills for CEMENT Case Sharing: The company is a well-known non-metallic mine company in South Africa, the company's main product is the ultra-fine superchard superchard of Fangquan and plaster. Microfour, the company learned our equipment through our website, read our case, and finally choose to buy our company's Rotor Mills for CEMENT as its gypsum ultrafine powder production line.
Technical parameters:
Finished granularity: D97: 5μm

Rotor Mills for cement The noise is excessive factors during the operation: 1 When the pulverizer is running, the operation member boosted the air to generate \"\";
2 Equipment, the vibration sound produced;
3 turntable or hammer and drugs; 4 The rubbing of the device turns the component itself.

1 Each of the rotating parts is added to the oil, if the bearing and the axis is misaligned, adjust; bearing wear, replace Bearing;
2 The thermal phenomenon of the pulverization process also produces noise, and can take the pulverizing chamber water cooling jacket to cool down;
3 At the sprinner, install the muffler;
4 to vibrate the equipment, Such as a damping pad.
If your Rotor Mills for CEMENT also has a similar problem, you can refer to the above situations and programs.


ALPA technology research and development crushing equipment has been applied in many actual engineering cases, providing basic information for objective understanding of jet grading technology.