Vibration Mill for Tailings

With the continuous development of pulverizer technology, Vibration Mill for Tailings has gradually penetrated into daily life.

Vibration Mill for tailings is transformed into a high pressure air flow of pulverization kinetic energy into a crushing cavity, which is the airflow distribution station. The airflow passes through the Raval nozzle accelerates supersonic airflow into the crushing chamber, the material Accelerated with the inquiral nozzle in the Wenqi.
Since the flow cycle of the jet of the crushing chamber and the animal feed, the particles and the particles and the fixed target wall hit, collide, friction, and grind. The fine particles were opened into the center of the pulverizer, and the cyclone separator was entered at the drive of the heart flow, and the coarse powder was thrown into the periphery of the pulverizing chamber, and cycled under the action of centrifugation and continued to be pulverized.

Technical parameters:
Finished granularity: D50: 3μm
Production capacity: 400kg

1, often Check the fastening of the components to prevent looseness from falling off, damage the machine.
2, each oil injection hole should be refueling, and the bearing portion is cleaned every half year to fill the lithium-based grease.
3
4, when the machine is deactivated, the external debris should be cleared, and the grease is filled with all the rotating parts, stored in the storage of air drying, non-corrosive gas.