Rotor Mills of Lithium Iron Phosphate

Most of the product production and processing in the current stage, using Rotor Mills of Lithium Iron Phosphate, using Rotor Mills of Lithium Iron Phosphate, is a very common way of processing, with the continuous improvement of scientific productivity, grading equipment Technology is also imminent. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.

Rotor Mills of Lithium Iron Phosphate is based on the size of the powder particle size, the specific gravity is different, and the settlement speed is different from the principle of the settling speed in the gas. The classifier, cyclone separator, dust collector, and the introducer make a set of hierarchical systems. Under the action of fan pulleys, the material is moved at a high speed, and the up airflow into the grading area. Under the action of the powerful centrifugal force generated by the high-speed rotation grading turbine, the coarse, fine particles are separated, and the fine particles that meet the particle size requirements by the gap of the grading wheel blades or the dust collector are collected. After the crude particles are partially fine particles, the velocity along the wall to the secondary air is disappeared and reduced.

The strong washing effect of the secondary wind, the thick particles are separated, and the fine particles rise to the secondary level of the secondary level, and the crude particles reduce the discharge port.

ALPA sodium hydrogen carbonate Rotor Mills of Lithium Iron Phosphate case share: The company often uses Rotor Mills of Lithium Iron Phosphate, and the power plant dry desulfurization requires sodium bicarbonate. Fine powder. The company has won many power plant dry desulfurization projects with our AlPa's cooperation. It is very satisfied with the Rotor Mills of Lithium Iron Phosphate we produced.
Technical parameters:
Finished granularity: 700 mesh
Production capacity: 800kg

To achieve better use, you must also pay attention to the daily daily of Rotor Mills of Lithium Iron Phosphate Maintenance, pay attention to the following points:
1. In the production process, the gas flow baffle should be checked regularly. When the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.
2. When using the pulverizer, the drive belt is easily stretched, and should pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should often be performed to ensure quality and production.
4. Continuously check the wear of blade and bushing, if the productivity is lowered, particlesReplace it, replace it after wear.
5. The change period of the pulverizer bearing is 2000 hours, and the amount of the bearing cavity is 1 ≤ 2 (try) or 3 ≤ 4 (try), otherwise the bearing temperature is too high.

Rotor Mills of Lithium Iron Phosphate has a lot of use, and I want to know more about the ultra-fine ganglift grader, welcome to consult with us!